Bombardier directives

The FAA is revising a notice of proposed rulemaking (NPRM) that would have applied to certain Bombardier, Inc., Model BD-700-2A12 airplanes. This action revises the NPRM by citing new material required for the revision of the existing maintenance or inspection program. The FAA is proposing this airworthiness directi…

The FAA proposes to adopt a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Model DHC-8-401 and DHC-8-402 airplanes. This proposed AD was prompted by a report that instructions for fay, fillet, and rivet dome sealing were omi…

The FAA proposes to adopt a new airworthiness directive (AD) for all Bombardier, Inc., Model BD-100-1A10 airplanes. This proposed AD was prompted by reports of pitch upset upon autopilot disconnect following engine indication and crew alerting system (EICAS) messages that indicated that the autopilot was holding sig…

The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This proposed AD was prompted by reports of fuel leakage near rib 6 during production pressure testing. An investigation found oversized holes in a certain outboard shear-tie. This proposed AD woul…

The FAA proposes to supersede Airworthiness Directive (AD) 2021-17-07, which applies to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. AD 2021-17-07 requires inspecting for damage of the left and right motive flow (MF) flexible fuel line assemblies (including the flexible hose…

The FAA is adopting a new airworthiness directive (AD) for all BRP-Rotax GmbH & Co KG (Rotax) Model 912 F2, 912 F3, 912 F4, 912 iSc2 Sport, 912 iSc3 Sport, 912 S2, 912 S3, 912 S4, 914 F2, 914 F3, and 914 F4 engines; and Model 912 A1, 912 A2, 912 A3, and 912 A4 engines included as part of the type-certificated aircra…

The FAA is adopting a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) airplanes. This AD was prompted by a determination that ne…

The FAA is superseding Airworthiness Directive (AD) 2025-06- 01, which applied to all Airbus Canada Limited Partnership Model BD- 500-1A10 and BD-500-1A11 airplanes. AD 2025-06-01 required revising the existing airplane flight manual (AFM) to incorporate the procedures for the flightcrew to manually isolate the oppo…

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by an in-service event where a main landing gear tire burst upon landing. This AD requires an inspection to determine if an affected brake control unit (BCU) is instal…

The FAA proposes to supersede Airworthiness Directive (AD) 2024-22-01, which applies to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. AD 2024-22-01 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworth…

The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This proposed AD was prompted by a report that the protective film cover on certain secondary power distribution assemblies (SPDA) might not have been removed. This proposed AD would require an ins…

The FAA is superseding Airworthiness Directive (AD) 2025-17- 12, which applied to all Bombardier, Inc., Model CL-600-1A11 (600) and CL-600-2A12 (601) airplanes and certain Model CL-600-2B16 (601-3A, 601- 3R, and 604 Variants) airplanes. AD 2025-17-12 required revising the existing maintenance or inspection program, …

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This AD was prompted by reports of missing or under torqued fasteners on the slat 2 cove rib 6 brackets. This AD requires a general visual inspection (GVI) of affected fasteners on slat 2 cove rib 6 brac…

The FAA is adopting a new airworthiness directive (AD) for all Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. The FAA previously sent this AD as an emergency AD to all known U.S. owners and operators of these airplanes. This AD was prompted by a report of several missing or broken hig…

The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD- 500-1A11 airplanes. This AD was prompted by the discovery of a low clearance condition between a hydraulic motor pump harness and the airplane structure at the aft fuselage between cer…

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10, BD-700-1A11, and BD-700- 2A12 airplanes. This AD was prompted by reports that certain seat frames were assembled without applying Loctite in certain locations of concern. This AD requires modification to the non-l…

The FAA is adopting a new airworthiness directive (AD) for all De Havilland Aircraft of Canada Limited Model DHC-8 airplanes. This AD was prompted by reports of cracked barrel nuts at the wing front spar and horizontal stabilizer to vertical stabilizer joint. This AD requires repetitive inspections for cracking and …

The FAA is superseding Airworthiness Directive (AD) 2024-04- 06, which applied to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. AD 2024-04-06 required repetitive operational checks of the gravity cross flow shut-off valve and, for certain airplanes, a one-time inspection of t…

The FAA is adopting a new airworthiness directive (AD) for all Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. This AD was prompted by certification testing that found that environmental control system (ECS) ducts manufactured using a certain material failed the flammability test requi…

The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by the discovery that titanium fasteners had been incorrectly installed in the butt strap at the outer wing box lower skin to center wing box interfa…

The FAA proposes to adopt a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This proposed AD was prompted by an in-flight uncommanded, unarrested flaps movement accompanied by a FLAPS FAIL caution mes…

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports that inappropriate tooling was used to torque the bolts securing the baggage door stop fittings, which may have resulted in an improper torque condition. T…

The FAA proposes to supersede Airworthiness Directive (AD) 2022-25-05, which applies to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. AD 2022-25-05 requires repetitive cleaning and greasing of all slat tracks to prevent damage or corrosion; doing repetitive inspections of the…

The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and - 402 airplanes. This AD was prompted by multiple in-service reports of cracks in elevator power control unit (PCU) brackets (fittings) and the elevator front spar. This AD requires replacin…

The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This proposed AD was prompted by reports of missing or under torqued fasteners on the slat 2 cove rib 6 brackets. This proposed AD would require a general visual inspection (GVI) of affected fasten…

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by a determination that the approach speed adders and landing distance factors must be corrected in the airplane flight manual (AFM) tables in the non-normal procedur…

The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model BD-700-1A10, and BD-700-1A11 airplanes. This proposed AD was prompted by an in-service event where a main landing gear tire burst upon landing. This proposed AD would require an inspection to determine if an affected brak…

The FAA is superseding Airworthiness Directive (AD) 2025-22- 02, which applied to certain MHI RJ Aviation ULC (type certificate previously held by Bombardier, Inc.) Model CL-600-2C10 (Regional Jet Series 700, 701 &702), CL-600-2C11 (Regional Jet Series 550), CL-600- 2D15 (Regional Jet Series 705), CL-600-2D24 (Regio…

The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by a report that, during a quality check in production, it was found that some of the tie rods supporting the overhead stowage compartments in the pa…

The FAA is adopting a new airworthiness directive (AD) for all Bombardier Inc. Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600- 2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a report of uncommanded nose wheel steering upon landing with touchdown on the runway centerline. This AD r…

The FAA is adopting a new airworthiness directive (AD) for all Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. This AD was prompted by the discovery that the outflow valve (OFV) direct current (DC) motor could potentially be inoperative when used in high differential pressure condition…

The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by the discovery on the production line that the electrical system harnesses in lavatory A had reduced bend radii, were not properly secured, and did…

The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD- 500-1A11 airplanes. This proposed AD was prompted by a report of multiple in-service failures of pressure regulating shutoff valves (PRSOVs). This proposed AD would require revising th…

The FAA proposes to adopt a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) airplanes. This proposed AD was prompted by a determ…

The FAA is superseding Airworthiness Directive (AD) 2023-23- 02, which applied to all MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440), CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series…

The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-2A12 airplanes. This proposed AD was prompted by reports of low clearance in the right wing between the fuel line flexible coupling and the harness support bracket clip-nut, between the fuel line flexible coupling…

The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by reports that inappropriate tooling was used to torque the bolts securing the baggage door stop fittings, which may have resulted in an improper torq…

The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10, BD-700-1A11, and BD- 700-2A12 airplanes. This proposed AD was prompted by reports that certain seat frames were assembled without applying Loctite in certain locations of concern. This proposed AD would requ…

The FAA proposes to supersede Airworthiness Directive (AD) 2025-06-01, which applies to all Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. AD 2025-06-01 requires revising the existing airplane flight manual (AFM) to incorporate the procedures for the flightcrew to manually isolate the…

The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by a determination that the approach speed adders and landing distance factors must be corrected in the airplane flight manual (AFM) tables in the non-…

The FAA proposes to supersede Airworthiness Directive (AD) 2025-22-02, which applies to certain MHI RJ Aviation ULC (type certificate previously held by Bombardier, Inc.) Model CL-600-2C10 (Regional Jet Series 700, 701 &702), CL-600-2C11 (Regional Jet Series 550), CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (…

The FAA proposes to adopt a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and -402 airplanes. This proposed AD was prompted by multiple in-service reports of cracks in elevator power control unit (PCU) brackets (fittings) and the elevator front spar. This propos…